Subject to Change: Fabri-Quilt New Block Blog Hop

INTRODUCING a 12″ x 12″ block designed for the 2015 Fabri-Quilt New Block Blog Hop. It’s called SUBJECT TO CHANGE because you can easily move the pieces or change the fabric selection to create a subtle difference in each block.

We received SIX FAT EIGHTHS from Fabri-Quilt, called the Watermelon Summer Bundle, one of each of the following colors:

Coral, Aqua, Turquoise, Chartreuse, Lapis and White

cut one strip three inches wide

Because I was able to make FIVE (5) [12 1/2 by 12 1/2 unfinished] blocks out of the SIX FAT EIGHTHS, I gave each of the blocks a name, representing each of the hosts of the Blog Hop: Stephanie, CherylTerri Ann and Yvonne:

Subject to Change Mosiac

Once they are assembled you get a cool modern quilt. I turned each block so that the “four patches” were together in the middle:
Subject to Change Four Patch

Let’s Get Started:

TIPS:

You can cut the fat eighths into three strips: (2) 3″ wide by the length of each fat eighth and one (1) strip 2 1/2″ wide by the length of the fat eighth.

subject to change Cutting Instructions

Subject to Change Assembly Page One

Subject to Change Assembly Page Two

That’s it. I took some photos of the assembly of the blocks and marked them with letters. You can see how easy it is to CHANGE.

The Stephanie

The Stephanie

The Terri Ann

The Terri Ann

The Cheryl

The Cheryl

The Yvonne

The Yvonne

With the scraps I made “fabric slabs” and cut the pieces according to the Cutting Instructions to create The Wanda:

The Wanda

The Wanda

For a pdf version of the block, Subject to Change, click here.

The four-day Blog Hop features more than 60 blogs where you will find free 12 x 12 inch quilt blocks. Today we have these bloggers:

Host – Yvonne @Quilting Jetgirl
Kelly @Quilting it Out
Martha @Once a Wingnut
Irene @Patchwork and Pastry
Cassandra @The (not so) Dramatic Life
Andrea @The Sewing Fools
Bernie @Needle and Foot
Silvia @A Stranger View
Wanda @Wanda’s Life Sampler
Sandra @Musings of a Menopausal Melon
Vicki @Orchid Owl Quilts
Jess @Quilty Habit
Diana @Red Delicious Life
Chelsea @Patch the Giraffe
Margo @Shadow Lane Quilts
Renee @Quilts of a Feather

There is also a giveaway each day on each hosts’ blog. Yvonne is today’s host. Inspired by Fabric blog will also be hosting a giveaway.

And, we are donating our blocks to the hosts who are going to make charity quilts for Project Linus, Meyers Center and Teen Impact.

Subject to Change,

Wanda

How to Make Facing Finishing Binding

press and stich downAs promised, I’m posting about how to make facing binding for your quilts. I used the “triangle corners” method. This method reduces the bulk in the corners but is more complicated than using mitered corners.

CUT TWO (2) 6 1/2 INCH SQUARES

CUT SQUARES ONCE ON THE DIAGONAL cut square on diagonal

PRESS UNDER 1/4 INCH ALONG LONG SIDE OF TRIANGLEpress triangle one quarter inch

CUT 2-INCH STRIPS

You will need enough strips to fit around the edges of the quilt.

SEW THE STRIPS TOGETHER

sew strips together on diagonalYou will make diagonal seams as you would to make double-folded binding.

PRESS UNDER 1/4 INCH ALONG LONG SIDE OF STRIP press under one quarter inchCUT STRIP INTO FOUR (4) STRIPS

You will have one for each side.

PLACE TRIANGLES ON EACH CORNER

You will pin in place.

PLACE A STRIP TO THE LEFT SIDE AND THEN THE RIGHT SIDE OF EACH TRIANGLE

The strips need to be at least 1/4 inch inside the edge of the triangle. You are going to sew the triangle to the two strips. Pin in place.

DRAW A LINE WHERE THE TRIANGLE OVERLAPS THE STRIP mark the strips

REMOVE EACH STRIP AND CUT 1/4 INCH TO THE RIGHT OF THE DRAWN LINE trim the strips to one quarter inch beyond line

STITCH THE TRIANGLE TO EACH STRIP ALONG THE DIAGONAL stitch triangle to strip

REPEAT FOR EACH TRIANGLE

PIN FACING TO QUILT, RIGHT SIDES TOGETHER

STITCH AROUND THE EDGES — 1/4 INCH FROM THE EDGE stitch to quilt right sides together

TRIM THE EDGES TO REDUCE BULK trim quilt corners

TURN RIGHT SIDE OUT AND PRESSpretty smart corners

HAND STITCH THE FACING TO THE QUILT

The finished backside looks like this: Liberated Quilt backTo hang, you will need to add a sleeve.

Facing is beautiful,

Wanda

How to Stabilize your Quilts with Grosgrain Ribbon

Grosgrain ribbon is the best way I have found to stabilize my quilts, particularly a wall quilt. It will hang like a painting. You can use twill tape, but you might find more uses for the ribbon. It is one-eighth inch wide.

SEVEN EASY STEPS:

(1) MEASURE EACH SIDE OF THE QUILT

(2) CUT THE RIBBON TO THOSE EXACT SIZES

You should have (4) pieces of ribbon at this point.

quilt binding facing measure

(3) FOLD THE RIBBON IN HALF AND INSERT PIN INTO RIBBON

(4) FOLD THE RIBBON IN QUARTERS AND INSERT PIN INTO RIBBON

You should have (3) pins now on each piece of ribbon.

(5) REPEAT ON THE QUILT AND PIN AT THE HALF MARK AND THE QUARTER MARKS

quilt binding facing pins

(6) LINE UP THE PINS ON THE RIBBON WITH THE PINS ON THE QUILT AND ATTACH

I created a “little quilt” to show how to do this:

Liberated Quilt binding facing pin on pin

(7) USING A TOP STITCH FOOT, STITCH AROUND THE QUILT

(you could also use a walking foot)

quilt binding facing stitch

quilt binding facing corner overlap

This method works for double-folded binding and for facing binding. The ribbon won’t show. I used facing binding for the quilt in the featured photo above. I’ll share a tutorial on facing in another post.

Feeling stable,

Wanda

I’m linking up with Late Night Quilter’s Tips and Tutorials Tuesday.

By the way, I learned this method from the book, Intuitive Color & Design, by Jean Wells.